Construction & Demolition Waste Recycling
Many homeowners and contractors may be surprised to hear that recycling options for certain construction materials and demolition "waste" exist in Vermont. Though recycling options are rapidly developing, this page will direct you to current recycling outlets, regulations, and Vermont-based resources and strategies for resource-conscious development.
Why recycle project components?
With some light planning and diligence, certain Construction and Demolition (C&D) waste materials can be separated from landfill wastes on your project site, and then recycled or salvaged into useful products or beautiful new structures. With more than 50,800 tons of waste generated annually from C&D projects in Vermont (accounting for 10% of residential waste and 15% of commercial waste), recycling or reusing project by-products across the State can make a large impact in resource conservation and mitigating landfill use.
Did you know: Act 250 requires that the applicant submit a Construction Waste Management Plan for projects involving more than 5,000 square feet of construction and/or demolition? Applicants can devise a site-specific plan, or utilize construction specification in lieu of a plan, or may use this plan template.
*Materials listed in bold indicate a subset of construction waste materials deemed architectural waste materials. Under certain conditions, State law requires that projects keep these materials out of the trash and transferred to a recycling facility. Read more below.
Projects Required to Recycle Architectural Materials Under State Law (10 V.S.A. § 6605m.)
Some construction, deconstruction, or demolition projects are required to separate architectural waste materials for the purpose of recycling. A project is subject to the requirement if it meets ALL of the following conditions:
Facilities Accepting Architectural Waste Materials for Recycling
Further information about architectural waste management can be found in three Agency publications: Architectural Waste - Summary and FAQs , Architectural Waste in Vermont - A Primer, and Policies on Architectural Waste Recycling.
There are currently two facilities in Vermont that accept loads of architectural waste, in addition to other materials. Check with each facility for details.
Myers C&D Recycling Facility
Casella C&D Recycling Facility
There are many other facilities around the state that will accept single materials, such as concrete, brick, asphalt, or a combination of several types. To locate a certified solid waste facility, visit the Materials Management Map.
Other Businesses and Organizations Accepting Used Material
Beyond solid waste facilities certified by the Agency of Natural Resources, there is a wide array of building salvage, reuse, and antique stores that look for quality used building materials, fixtures, and appliances.